Seagate Technology ST38422A hard drive specifications
Seagate Medalist 8422 - hard drive - 8.6 GB - ATA-66
This Seagate Medalist Hard Drive features an Ultra ATA/66 interface, which delivers data transfer rates of up to 66.7MB per second, making it easier to run more than one drive on your system at the same time. The Ultra ATA/66 interface is enhanced by improved timing margins and the use of Cyclical Redundancy Check (CRC), which is a data protection scheme that helps assure the integrity of transferred data. In addition, it provides an average seek time of less than 9 milliseconds, a 5400RPM spindle speed and a 512K cache buffer. This Medalist hard drive is SMART compliant and uses the Seagate's SeaShield System for greater reliability and data integrity. It also boasts a non-operating shock resistance of 300Gs to reduce the chance that you damage the drive while you are installing it.
Recommended software for Seagate Technology ST38422A status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
ST38422A
Hard drive health monitoring software
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.8 in
Height
1 in
Weight
1.3 lbs
Hard Drive
Form Factor
Capacity
8.6 GB
Interface Type
ATA-66
Buffer Size
512 KB
Bytes per Sector
512
Compliant Standards
S.M.A.R.T.
Performance
Drive Transfer Rate
66.6 MBps
Internal Data Rate
23.5 MBps
Seek Time
11 ms (average) / 18 ms (max)
Track-to-Track Seek Time
1.3 ms
Average Latency
5.56 ms
Spindle Speed
5400 rpm
Reliability
Mean time before failure
400,000 hour(s)
Storage Hard Drive / Non-Recoverable Errors
1 per 10^14
Start / Stop Cycles
40,000
Storage Controller
Type
None
Expansion / Connectivity
Connections
1 x Storage - ATA-66 - 40 pin IDC
Compatible Bays
1 x Internal - 3.5" x 1/3H
Compatible Slots
x None
Power
Power Device
None
Software / System Requirements
Software Included
None
Manufacturer Warranty
Service & Support
1 year warranty
Service & Support Details
Limited warranty - Parts and labor - 1 year - Bring-in
Environmental Parameters
Min Operating Temperature
32 �F
Max Operating Temperature
131 �F
Humidity Range Operating
8 - 80%
Shock Tolerance
63 g @ 2ms half-sine pulse (operating) / 300 g @ 2ms half-sine pulse (non-operating)
Vibration Tolerance
0.5 g @ 22-375 Hz (operating) / 5 g @ 22-375 Hz (non-operating)
Sound Emission
41 dB
Max Altitude Operating
9840 ft
0.0620