Quantum Corporation QM336400KN-LW hard drive specifications
Quantum Atlas IV - hard drive - 36.4 GB - Ultra2 Wide SCSI
Quantum's Atlas IV 7,200 RPM hard disk drives are the industry's first drives that support the backward-compatible Ultra160/m SCSI interface for mainstream servers, workstations, and storage subsystems. With a 6.9 millisecond (ms) average seek time, a 257 megabit-per-second (Mb/sec) internal transfer rate, and fourth-generation Atlas architecture, the Atlas IV drive is a cost-effective solution that delivers high-I/O, high-throughput performance with outstanding reliability. The drives provide enormous capacity from 9.1 gigabytes (GB) in a two-platter design to 36.4 GB in an eight-platter design. Atlas IV also features Quantum's breakthrough Shock Protection System (SPS) to protect against one of the leading causes of hard disk failure mistreatment during handling and integration.
Recommended software for Quantum Corporation QM336400KN-LW status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
QM336400KN-LW
Hard drive health monitoring software
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.7 in
Height
1.6 in
Weight
2 lbs
Hard Drive
Form Factor
Capacity
36.4 GB
Interface Type
Ultra2 Wide SCSI
Connector
68 pin HD D-Sub
Buffer Size
2 MB
Bytes per Sector
512
Compliant Standards
S.M.A.R.T., 352-bit Reed Solomon ECC
Performance
Drive Transfer Rate
80 MBps
Internal Data Rate
257 MBps
Seek Time
7.5 ms (average) / 16 ms (max)
Track-to-Track Seek Time
0.8 ms
Average Latency
4.17 ms
Spindle Speed
7200 rpm
Reliability
Storage Hard Drive / Recoverable Errors
1 per 10^10
Storage Hard Drive / Non-Recoverable Errors
1 per 10^14
Storage Controller
Type
None
Expansion / Connectivity
Connections
1 x Storage - Ultra2 Wide SCSI - 68 pin HD D-Sub (HD-68)
Compatible Bays
1 x Internal - 3.5" x 1/2H
Compatible Slots
x None
Miscellaneous
Cables Included
None
Power
Power Device
None
Manufacturer Warranty
Service & Support
5 years warranty
Service & Support Details
Limited warranty - Parts and labor - 5 years - Bring-in
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
131 �F
Humidity Range Operating
10 - 90%
Shock Tolerance
150 g @ 2ms half-sine pulse (non-operating)
Vibration Tolerance
0.5 g @ 5-500 Hz (operating) / 2 g @ 5-500 Hz (non-operating)
Sound Emission
40 dB
Max Altitude Operating
9840 ft
0.0738