Quantum Corporation QM318200KN-SCA hard drive specifications
Quantum Atlas IV - hard drive - 18.2 GB - Ultra2 Wide SCSI
Quantum's Atlas IV 7,200 RPM hard disk drives are the industry's first drives that support the backward-compatible Ultra160/m SCSI interface for mainstream servers, workstations, and storage subsystems. With a 6.9 millisecond (ms) average seek time, a 257 megabit-per-second (Mb/sec) internal transfer rate, and fourth-generation Atlas architecture, the Atlas IV drive is a cost-effective solution that delivers high-I/O, high-throughput performance with outstanding reliability. The drives provide enormous capacity from 9.1 gigabytes (GB) in a two-platter design to 36.4 GB in an eight-platter design. Atlas IV also features Quantum's breakthrough Shock Protection System (SPS) to protect against one of the leading causes of hard disk failure mistreatment during handling and integration.
Recommended software for Quantum Corporation QM318200KN-SCA status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
QM318200KN-SCA
Hard drive health monitoring software
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.7 in
Height
1 in
Weight
1.3 lbs
Hard Drive
Form Factor
Capacity
18.2 GB
Interface Type
Ultra2 Wide SCSI
Connector
80 pin Centronics (SCA-2)
Buffer Size
2 MB
Bytes per Sector
512
Compliant Standards
S.M.A.R.T., 352-bit Reed Solomon ECC
Performance
Drive Transfer Rate
160 MBps
Internal Data Rate
257 MBps
Seek Time
6.9 ms (average) / 15 ms (max)
Track-to-Track Seek Time
0.8 ms
Average Latency
4.17 ms
Spindle Speed
7200 rpm
Reliability
Storage Hard Drive / Recoverable Errors
1 per 10^10
Storage Hard Drive / Non-Recoverable Errors
1 per 10^14
Storage Controller
Type
None
Expansion / Connectivity
Connections
1 x Storage - Ultra2 Wide SCSI - 80 pin Centronics (SCA-2)
Compatible Bays
1 x Internal - 3.5" x 1/3H
Compatible Slots
x None
Miscellaneous
Cables Included
None
Power
Power Device
None
Manufacturer Warranty
Service & Support
5 years warranty
Service & Support Details
Limited warranty - Parts and labor - 5 years - Bring-in, Technical support - Phone consulting - Unlimited
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
131 �F
Humidity Range Operating
10 - 90%
Shock Tolerance
200 g @ 2ms half-sine pulse (non-operating)
Vibration Tolerance
1 g @ 5-500 Hz (operating) / 2 g @ 5-500 Hz (non-operating)
Sound Emission
36 dB
Max Altitude Operating
9840 ft
0.1234