Seagate Technology 2F020L0 hard drive specifications

Maxtor Fireball 3 - hard drive - 20 GB - ATA-133

The Maxtor Fireball 3 drive is the single-head/single-platter hard drive with an Ultra ATA/133 interface. Because it combines value and performance, this drive is an excellent choice for entry-level desktop systems and consumer electronics applications. The drive's inner diameter load/unload ramp locks the recording head into a protective carrier to cradle the head during shipment and any other time the drive is not in operation. The Fireball 3 drive takes reliability and data integrity to a higher level with the Maxtor Shock Protection System (SPS) and Data Protection System (DPS). SPS and DPS give the user enhanced protection against both operating and non-operating shock and verify essential functions in seconds to minimize costly drive returns. These drives continue the Maxtor tradition of delivering high reliability with performance. Maxtor Quiet Drive Technology provides users with superior disk drive acoustics by reducing noise levels and improving sound quality. When your application calls for a cost-effective, high-performance storage solution, select the Fireball 3 series by Maxtor.

Recommended software for Seagate Technology 2F020L0 status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com


Manufacturer
Seagate Technology

HDD Part Number
2F020L0


Hard drive health monitoring software
ActiveSMART by Ariolic Software. Click to download ActiveSMART

General

Device Type
Hard drive - Internal hard drive

Width
4 in

Depth
5.7 in

Height
0.7 in

Weight
1.1 lbs

Hard Drive

Form Factor

Capacity
20 GB

Interface Type
ATA-133

Buffer Size
2 MB

Features
Data Protection System (DPS), Quiet Drive Technology (QDT), Shock Protection System (SPS), Fluid Dynamic Bearing (FDB) motor

Performance

Drive Transfer Rate
133 MBps

Seek Time
12 ms (average)

Average Latency
5.5 ms

Spindle Speed
5400 rpm

Reliability

Storage Hard Drive / Non-Recoverable Errors
1 per 10^15

Start / Stop Cycles
50,000

Storage Controller

Type
None

Expansion / Connectivity

Interfaces
1 x ATA-133 - 40 pin IDC

Compatible Bays
1 x Internal - 3.5" x 1/3H

Compatible Slots
x None

Power

Power Device
None

Manufacturer Warranty

Service & Support
3 years warranty

Service & Support Details
Limited warranty - 3 years

Environmental Parameters

Min Operating Temperature
41 �F

Max Operating Temperature
131 �F

Shock Tolerance
30 g @ 2ms half-sine pulse (operating) / 300 g @ 2ms half-sine pulse (non-operating)

Sound Emission
26 dB


0.0922