Hitachi America Ltd. 0A35772 hard drive specifications
Hitachi Ultrastar A7K1000 - hard drive - 1 TB - SATA-300
The Ultrastar A7K1000 features a 3 Gb/s SATA interface supporting key features in the Serial-ATA specification including Native Command Queuing (NCQ), staggered spin-up and hot-swap capability. The Ultrastar A7K1000 allows for configuration scalability and with the same physical connector as Serial Attached SCSI (SAS) drives, it's ideal for use in mixed-drive environments. In multi-drive environments, rotational vibration, which results from the vibration of neighboring drives in a system, can degrade hard drive performance. To aid in maintaining high performance, the Ultrastar A7K1000 incorporates enhanced Rotational Vibration Safeguard (RVS) technology providing up to 50% improvement over the previous generation against performance degradation, leading the industry.
Recommended software for Hitachi America Ltd. 0A35772 status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
0A35772
Hard drive health monitoring software
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.8 in
Height
1 in
Weight
1.5 lbs
Hard Drive
Form Factor
Capacity
1 TB
Interface Type
Serial ATA-300
Buffer Size
32 MB
Features
Load/unload technology, Native Command Queuing (NCQ), Thermal Flyheight Control (TFC), Self-Protection Throttling (SPT), Fluid Dynamic Bearing (FDB) motor, Rotational Vibration Safeguard (RVS)
Performance
Drive Transfer Rate
300 MBps
Internal Data Rate
134 MBps
Seek Time
8.2 ms (average)
Average Latency
4.17 ms
Spindle Speed
7200 rpm
Reliability
Mean time before failure
1,200,000 hour(s)
Storage Hard Drive / Non-Recoverable Errors
1 per 10^15
Start / Stop Cycles
50,000
Storage Controller
Type
None
Expansion / Connectivity
Interfaces
1 x Serial ATA-300 - 7 pin Serial ATA
Compatible Bays
1 x Internal - 3.5" x 1/3H
Compatible Slots
x None
Miscellaneous
Microsoft Certifications
Compatible with Windows 7
Compliant Standards
RoHS
Manufacturer Warranty
Service & Support
5 years warranty
Service & Support Details
Limited warranty - 5 years
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
140 �F
Shock Tolerance
70 g @ 2ms half-sine pulse (operating)
Vibration Tolerance
0.67 g @ 5-500 Hz (operating) / 1.04 g @ 2-200 Hz (non-operating)
0.0754