Fujitsu MHT2040BH hard drive specifications
FUJITSU Mobile MHT2040BH - hard drive - 40 GB - SATA-300
With the MHT-BH drives, Fujitsu delivers the power of integrated Serial ATA in a 2.5" form factor, it also features Native Command Queuing (NCQ), a feature that intelligently and simultaneously co-ordinates up to 32 instructions to be queued and reordered by the hard disk controller, thereby contributing to a significant improvement in overall hard disk drive performance. These drives operate through a SATA 1.0a / SATA II 1.0 interface, offer a host interface rate of 150MB/s, low track to track seek time of 1.5ms and a low operating power consumption of 2.3W.
Recommended software for Fujitsu MHT2040BH status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
MHT2040BH
Hard drive health monitoring software
ActiveSMART by Ariolic Software. Click to download ActiveSMART
General
Device Type
Hard drive - Internal hard drive
Width
2.8 in
Depth
3.9 in
Height
0.4 in
Weight
2.2 lbs
Hard Drive
Form Factor
Capacity
40 GB
Interface Type
Serial ATA-300
Buffer Size
8 MB
Features
Load/unload technology, Glass Direct Texture (GDT), Fluid Dynamic Bearing (FDB) motor
Compliant Standards
S.M.A.R.T., 320-bit Reed Solomon ECC
Performance
Drive Transfer Rate
150 MBps
Internal Data Rate
53.9 MBps
Seek Time
12 ms (average) / 22 ms (max)
Track-to-Track Seek Time
1.5 ms
Average Latency
5.56 ms
Spindle Speed
5400 rpm
Reliability
Mean time before failure
300,000 hour(s)
Storage Hard Drive / Non-Recoverable Errors
1 per 10^13
Seek Errors
1 per 10^6
Start / Stop Cycles
300,000
Storage Controller
Type
None
Expansion / Connectivity
Interfaces
1 x Serial ATA-300 - 7 pin Serial ATA
Compatible Bays
1 x Internal - 2.5" x 1/8H
Compatible Slots
x None
Power
Power Device
None
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
131 �F
Humidity Range Operating
8 - 90%
Shock Tolerance
900 g @ 1ms (non-operating)
Sound Emission
34 dBA
0.0881