HP 213218-001 hard drive specifications
Compaq hard drive - 10.2 GB - ATA-100
Compaq hard disk drives undergo an intense qualification process that eliminates data integrity problems, firmware and O/S incompatibilities, and other causes of data corruption or premature failure. Compaq hard disk drives are specifically designed and tested for flawless operation in your equipment. Supply your server, workstation or notebook with a Compaq hard disk drive and you will prevent incompatibilities that can rob your system of performance or cause you to lose valuable data.
Recommended software for HP 213218-001 status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
213218-001
Hard drive health monitoring software
ActiveSMART by Ariolic Software. Click to download ActiveSMART
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.7 in
Height
1 in
Weight
1.3 lbs
Hard Drive
Form Factor
Capacity
10.2 GB
Interface Type
ATA-100
Buffer Size
512 KB
Bytes per Sector
512
Compliant Standards
S.M.A.R.T.
Performance
Drive Transfer Rate
100 MBps
Internal Data Rate
49.8 MBps
Seek Time
9.5 ms (average) / 17 ms (max)
Track-to-Track Seek Time
1 ms
Average Latency
5.6 ms
Spindle Speed
5400 rpm
Reliability
Mean time before failure
500,000 hour(s)
Storage Hard Drive / Non-Recoverable Errors
1 per 10^14
Seek Errors
1 per 10^6
Start / Stop Cycles
50,000
Storage Controller
Type
None
Expansion / Connectivity
Connections
1 x Storage - ATA-100 - 40 pin IDC
Compatible Bays
1 x Internal - 3.5" x 1/3H
Compatible Slots
x None
Power
Power Device
None
Software / System Requirements
OS Required
None
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
131 �F
Humidity Range Operating
8 - 80%
Shock Tolerance
40 g @ 11ms half-sine pulse (operating) / 300 g @ 11ms half-sine pulse (non-operating)
Vibration Tolerance
0.5 g @ 5-300 Hz (operating) / 4 g @ 5-400 Hz (non-operating)
Max Altitude Operating
9840 ft
0.0827