Western Digital Corp. WD91FG00AS hard drive specifications
9.1GB SCSI ULTRA2-WIDE LVD 68P 10K RPM 3.5LP 2MB 6.6MS VANTAGE
Western Digital drives undergo an intense qualification process that eliminates data integrity problems, firmware and O/S incompatibilities, and other causes of data corruption or premature failure. Western Digital hard drives are specifically designed and tested for flawless operation in your equipment. By using a Western Digital hard drive with your server or workstation, you prevent incompatibilities that can rob your system of performance or cause you to lose valuable data.
Recommended software for Western Digital Corp. WD91FG00AS status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com
Manufacturer
HDD Part Number
WD91FG00AS
Hard drive health monitoring software
ActiveSMART by Ariolic Software. Click to download ActiveSMART
General
Device Type
Hard drive - Internal hard drive
Width
4 in
Depth
5.7 in
Height
1 in
Weight
1.5 lbs
Hard Drive
Form Factor
Capacity
9.1 GB
Interface Type
Ultra2 Wide SCSI
Connector
68 pin HD D-Sub
Buffer Size
2 MB
Bytes per Sector
512
Compliant Standards
320-bit Reed Solomon ECC
Performance
Drive Transfer Rate
80 MBps
Internal Data Rate
45 MBps
Seek Time
5.2 ms (average) / 13 ms (max)
Track-to-Track Seek Time
0.6 ms
Average Latency
2.99 ms
Spindle Speed
10000 rpm
Reliability
Storage Hard Drive / Non-Recoverable Errors
1 per 10^14
Start / Stop Cycles
20,000
Storage Controller
Type
None
Expansion / Connectivity
Connections
1 x Storage - Ultra2 Wide SCSI - 68 pin HD D-Sub (HD-68)
Compatible Bays
1 x Internal - 3.5" x 1/3H
Compatible Slots
x None
Miscellaneous
Cables Included
None
Power
Power Device
None
Software / System Requirements
Software Included
None
OS Required
None
Manufacturer Warranty
Service & Support
5 years warranty
Service & Support Details
Limited warranty - Parts and labor - 5 years - Bring-in
Environmental Parameters
Min Operating Temperature
41 �F
Max Operating Temperature
122 �F
Humidity Range Operating
10 - 90%
Shock Tolerance
10 g @ 2ms half-sine pulse (operating) / 200 g @ 2ms half-sine pulse (non-operating)
Vibration Tolerance
1 g @ 10-300 Hz (operating) / 2 g @ 10-300 Hz (non-operating)
Sound Emission
40 dB
Max Altitude Operating
9840 ft
0.0869